1. Go to Start, select DHCP.
2. Expand the System name right click IPv4 select New Scope
3. The New Scope wizard starts, click Next.
4. Enter Name and a Description for the scope and click Next.
5. Enter the IP Address Range to be leased to clients, click Next.
Note: Mention the scope range in the same network of DHCP server.
6. To exclude IP addresses, enter the Start and end IP address, click Add. Click Next.
7. In the Lease Duration screen, you can Increase or Decrease the value, click Next.
8. In the Configure DHCP Options screen, choose Yes, to configure DHCP options for this scope (such as routers, DNS, and WINS settings) now. Click Next.
9. In the Router (Default Gateway) screen, enter the IP address of the router that will function as the default gateway for this scope clients and click Add. Or, if you don’t have a Router in your network, just click Next.
10. In the Domain Name and DNS Servers screen enter the name of the Parent Domain & IP address of the DNS server, click Add click Next.
11. In the WINS Servers screen enter the IP address of the WINS server, click Add click Next, if you don’t have a WINS server on your network, just click Next.
12. In the Activate Scope screen, select YES and click Next.
Note: A DHCP server can’t assign IP addresses until the scope is activated.
13. Click Finish to complete the creation of Scope.
SYS2 - CONFIGURATION
Verification: In DHCP Client
1. Right click network Icon Select properties click View Status and select properties Select Internet protocol Version 4 (TCP/IPv4) Properties and select Obtain an IP Address automatically and Obtain an DNS Server Address Automatically OK
2. Open the Command Prompt and type ipconfig /release
3. Then type ipconfig /renew
4. After that Right click on network Icon Select properties click View Status and click Details.
5. Verify the IP Address leased by the DHCP Server along with the lease duration and DHCP Server and DNS Server details.
2. Expand the System name right click IPv4 select New Scope
3. The New Scope wizard starts, click Next.
4. Enter Name and a Description for the scope and click Next.
5. Enter the IP Address Range to be leased to clients, click Next.
Note: Mention the scope range in the same network of DHCP server.
6. To exclude IP addresses, enter the Start and end IP address, click Add. Click Next.
7. In the Lease Duration screen, you can Increase or Decrease the value, click Next.
8. In the Configure DHCP Options screen, choose Yes, to configure DHCP options for this scope (such as routers, DNS, and WINS settings) now. Click Next.
9. In the Router (Default Gateway) screen, enter the IP address of the router that will function as the default gateway for this scope clients and click Add. Or, if you don’t have a Router in your network, just click Next.
10. In the Domain Name and DNS Servers screen enter the name of the Parent Domain & IP address of the DNS server, click Add click Next.
11. In the WINS Servers screen enter the IP address of the WINS server, click Add click Next, if you don’t have a WINS server on your network, just click Next.
12. In the Activate Scope screen, select YES and click Next.
Note: A DHCP server can’t assign IP addresses until the scope is activated.
13. Click Finish to complete the creation of Scope.
SYS2 - CONFIGURATION
Verification: In DHCP Client
1. Right click network Icon Select properties click View Status and select properties Select Internet protocol Version 4 (TCP/IPv4) Properties and select Obtain an IP Address automatically and Obtain an DNS Server Address Automatically OK
2. Open the Command Prompt and type ipconfig /release
3. Then type ipconfig /renew
4. After that Right click on network Icon Select properties click View Status and click Details.
5. Verify the IP Address leased by the DHCP Server along with the lease duration and DHCP Server and DNS Server details.
Comments
Post a Comment